

-
ꀇ
Home
-
About us
-
Products
- Photomultiplier Tube Series
- Photomultiplier tube
- PMT Module
- MCP-PMT
- Radiation Detector
- CZT Detector
- PIPS Detector
- Gas Detector
- Scintillation Detector
- Electronics
- Multi-channel analyzer
- Preamplifiers/Socket Electronics
- Pulse Processing Chip
- Spectrometer System
- SiPM products
- Si-Photomultiplier(SiPM)
- SiPM Array
- Scintillation Crystal
- Customization
-
Service
-
News
-
Contact us


-
ꀇ
Home
-
About us
-
Products
- Photomultiplier Tube Series
- Photomultiplier tube
- PMT Module
- MCP-PMT
- Radiation Detector
- CZT Detector
- PIPS Detector
- Gas Detector
- Scintillation Detector
- Electronics
- Multi-channel analyzer
- Preamplifiers/Socket Electronics
- Pulse Processing Chip
- Spectrometer System
- SiPM products
- Si-Photomultiplier(SiPM)
- SiPM Array
- Scintillation Crystal
- Customization
-
Service
-
News
-
Contact us
BGO Scintillation Crystal
Description:
Bi4Ge3O12 refers to a scintillation crystal made from Bismuth Oxide and Germanium Oxide. BGO is a widely used inorganic scintillator material known for its several desirable characteristics in radiation detection and medical imaging, such as high density, high effective atomic number and high stopping power for gamma rays.
BGO crystal has also been proven to be reliable in Oil&Gas wireline logging and the mineral wireline logging when coupled with light sensors, such as photo-multiplier tubes(PMTs), where the NaI(TI) crystal has been universally used. The lacked of spectrum resolution could be compensated by its high photon fraction for high energy gamma ray naturally occurring from Uranium and Thorium.
Specification:
BGO | Unit | |
---|---|---|
Density | 7.13 | g/cm3 |
Wavelength of Emission Peak | 480 | nm |
Hardness | 5 | Moh |
Light Output | 8500 | ph/MeV |
Decay time | 317 | ns |
Refractive Index | 2.15 | - |
Hygroscopic | No | - |
Cleavage | No | - |
Beside the BGO scintillator crystal, we have the capability to assemble photo-multiplier tubes(PMTs) on the crystal with standard 14 pins, also the whole detector included a voltage divider, pre-amplifier and 4 pin connector is workable, which has been widely used in the nuclear radiometric detection.